-
Does the incense making equipment need regular maintenance?
2020-12-24 456
We attach importance to the consideration of product quality. The equipment that has been developed for several years has been operated by many large, medium and small-sized users in China. The universality, practicability and stability of our equipment are guaranteed. In addition, we are proud of the good performance of the equipment and one-stop service. The incense making equipment looks simple, but in fact, it has high skill content. It takes a lot of time and cost to develop a good fragranc
-
What are the misunderstandings in the maintenance of incense making machine?
2020-12-24 477
1. When a new product is replaced with a new cylinder liner piston, it is assumed that the new cylinder liner and piston are all standard, so it is OK to install it. In fact, the specifications of cylinder liner and piston have a certain scope of public service. If a large standard cylinder liner is equipped with a small standard piston, the cooperation space will be too large, resulting in weak tightening and difficulty in launching. Therefore, it is necessary to check the code of standard cyli
-
Why does the new bearing of fragrance making machine make noise after being installed?
2020-12-24 470
I believe that we have all experienced the noise of the new bearing of the fragrance making machine. At this time, we must think of the return, but bearing noise must be the quality factor of the product? Through the long-term summary of the technical personnel, the bearing noise has the following factors, and maybe there are many other factors that we have not encountered. We hope we can make up for them. 1. There are impurities in the grease; 2. Lack of lubrication (oil level is too low, impro
-
Product quality and production efficiency of fragrance making machine
2020-12-24 483
By mastering the process and formula, the aroma making machine can also control the burning time of incense. Of course, the important thing is still to smell. The high-quality thread fragrance usually has no obvious fragrance when it is not lit. After lighting, the fragrance is also very mellow and has no effect. Moreover, the freshly burned ash has no hot feeling. When producing, set the standard size of Xianxiang. Put the agarwood clay into the linear incense making machine and plug it tightly
-
Process steps of making Buddhist incense
2020-12-24 457
First preparation ingredients: Xianxiang is the fragrance without bamboo core, commonly known as zhitiaoxiang, Caoxiang and Xianxiang. Mainly wood flour or carbon powder, sticky powder (elm bark powder or corn starch), essence, pigment (commonly used rosin, red, yellow, green, gold powder, etc.) and help and other information (quality of progress may reduce costs, producers add some trace items, such as Ling powder, gold tablets, calcium carbonate, potassium nitrate and other components, see the
-
How to ensure the stable operation of Guangdong automatic aroma machine?
2020-12-24 465
Since ancient times in our country, there have been special and persistent followers on incense. Both Buddhist incense and general incense are welcomed by Chinese people. Especially in the aspect of Buddhist incense, the burning of Buddhist incense has always been something that many people must do on New Year's holidays. This is not a symbol of superstition, but also a symbol of belief and respect. With the development of the times, now the demand for incense is also increasing, and automatic i
-
Seven things to pay attention to when using Xinhui automatic incense making machine
2020-12-24 451
Now, we need to check whether the new type of machine has been put into use. 2. Stop placing inflammable and explosive materials near the full brake incense making machine to avoid accidents. 3. Uniform cutting should be insisted in production to ensure product quality and normal production. 4. Stop the motor overload together to ensure the normal operation of the machine. 5. Often
-
What should Guangdong automatic incense making machine do before dismantling the bearing?
2020-12-24 453
(1) remove the decorative cover and dust cover of the bearing head; (2) remove the tire nut and tire, and be careful not to damage the thread of the tire bolt. If it is a disc brake, the brake should be removed and then used to remove the lock ring or lock pin. (3) remove the bearing with special tools; (4) scrape off the old grease in the bearing, journal and bearing cavity, clean the bearing and journal with detergent and dry it with cloth, and finally wipe the bearing cavity with cloth. (5) c